So alot of people have asked me how to make the jewelry box so I decide to make a tutorial. I dont have a video camera, so pictures will have to do.
You need 2 pieces of chip board 6x6 inches.
You need 4 pieces of cardstock 6x6 inches
You are going to paste the cardstock on both sides of the chip boards above.
Now we're going to make the drawers.
Cut cardstock at 4 15/16 (length) x 4 1/8 (width) inches, cut 4 of these.
Score at 4 (length) and 3 3/16 (width).
Cut as shown above.
Glue as shown above.
Fold the 4 corners, and your first drawer is almost done.
Add a mat to the front of your drawer, 2 (length) and 3/4 (width) inches.
I've mounted Tim Holtz Hitch Fasteners on each drawer.
Now on to the outside of the drawer.
This panel is 7 5/8 x 3 1/8 inches
Scor at 1 inch, 3 5/16 inch, 4 5/16 inch and 6 5/8 inch
You will need 4 of these.
Fold and glue as shown above.
This is what it should look like.
We will now glue the drawers on the bottom of the box.
Add glue to the top of the drawers.
Then add the top of your box.
Add a easel card to the top of your box, and you are done:)